Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I General CLI Information
- Part II Noninteractive Commands
- 4 General Noninteractive Commands
- 5 Fibre Channel Noninteractive Commands
- Displaying System Information (Command Line Options -g, -z)
- Command Format
- Command Summary
- -a
- -b (Flash Update; Save Flash)
- -bbcr (BB Credit Recovery)
- -c (Display HBA Parameters)
- -ctp (CT Ping Test)
- -d (Driver Update)
- -dm (Transceiver Diagnostics Monitoring Interface [DMI])
- -dp (Diagnostic Port Test)
- -dport (Diagnostics Port)
- -e (Boot Devices Configuration)
- -ei
- -f
- -fcep (Diagnostics FC Ping [ELS Echo Ping])
- -fcp (Ping Test)
- -fec (FEC Enable/Disable)
- -fg (Display Driver Persistent Binding Settings)
- -ftr (CT FTR Test)
- -fs (Driver Parameters)
- -fwdump (Firmware Dump)
- -g
- -gs (Configure Parameters [Monitoring])
- -h (Help)
- -ha (Adapter Alias [FCoE Configuration])
- -i (FC Adapter Information; FC VPD Information; FC VFC Information)
- -kl (Loopback Test)
- -kr (Read Write Buffer Test)
- -l (FC Target/LUN Information)
- -ls (Display Parameters [HBA Statistics]; Link Status)
- -m (Selective LUNs)
- -mbiv (Flash/MBI Information)
- -n (Configure HBA Parameters)
- -o (Redirect Standard Output To a File)
- -p (Target Persistent Bindings)
- -pa (Adapter Port Alias [FCoE Configuration])
- -pc (Adapter Personality Change)
- -pl (Persistent Names [udev] – Linux only)
- -q (Target Link Speed [iiDMA])
- -qos (Quality of Service [QoS])
- -r (Parameters Update; Save HBA Parameters)
- -rdp (Read Diagnostics Parameter)
- -s (Suppress Output [Silent Mode])
- -scm (Congestion Management)
- -sp (FC Board Config Update)
- -t (FC Target/LUN Information)
- -tb (Target Beacon)
- -tm (Temperature Monitor)
- -tp (Topology)
- -trace (FCE Trace)
- -u (Firmware Preload Table Update)
- -v (QCC CLI Version Information)
- -vp (Virtual Ports [NPIV])
- -x (XML Output [Legacy])
- -x2 (XML Output)
- -z (All Information)
- Part III Interactive Commands
- 6 Fibre Channel Interactive Commands
- Adapter Information
- Adapter Configuration
- Adapter Alias (-ha)
- Adapter Port Alias (-pa)
- HBA Parameters
- Target Persistent Binding (-p)
- Persistent Names (-pl)
- Boot Devices Configuration
- Virtual Ports (NPIV) (-vp)
- Target Link Speed (iiDMA)) (-q)
- Driver Parameters (-fs)
- Selective LUNs (-m)
- Quality of Service (QoS) (-qos)
- Export (Save) Configuration
- Generate Reports
- Personality (-pc)
- FEC (-fec)
- BB Credit Recovery (-bbcr)
- Adapter Updates
- Adapter Diagnostics
- Monitoring
- Refresh
- Help (-h)
- Exit
- A Revision History
- 6 Fibre Channel Interactive Commands
- Glossary
5–Fibre Channel Noninteractive Commands
-i (FC Adapter Information; FC VPD Information; FC VFC Information)
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 57 Copyright © 2021 Marvell
Flash MPI Firmware Version : 1.02.06
Flash PEP Firmware Version : 1.00.23
Actual Connection Mode : Point to Point
Actual Data Rate : 16 Gbps
Supported Speed(s) : 4 8 16 Gbps
Chip Model Name : ISP2714-based 16/32Gb Fibre Channel to PCIe
Adapter
Chip Revision : 0x1(A0)
PortType (Topology) : NPort
Target Count : 1
PCI Bus Number : 4
PCI Device Number : 0
PCI Function Number : 0
PCI Device ID : 0x2071
Subsystem Device ID : 0x02a3
Subsystem Vendor ID : 0x1077
PCIe Max Bus Width : x16
PCIe Negotiated Width : x8
PCIe Max Bus Speed : 8.0 Gbps
PCIe Negotiated Speed : 8.0 Gbps
HBA Temperature (C) : 59
HBA Status : Online (FEC)
To view adapter information for the QLE2690, QLE2692, QLE2964, QLE2964L,
QLE2740, QLE2742, QLE2764, QLE2770, QLE2772, and QLE2774 on which the
port link is up, issue the following command. Command output for these specific
models includes the host NVMe qualified name (NQN) for NVM Express
®
(NVMe
™
) over Fibre Channel (NVMe-oF).
qaucli -pr fc -i 0
Host Name : NX2-22A1-22A3
Host NQN : nqn.2018-08.com.marvell:nvme.host.sys.wwpn:21000024ff8fd7f4
HBA Instance : 1
HBA Model : QLE2742
HBA Description : QLE2742 Dual Port 32Gb FC to PCIe Gen3 x8 Adapter
HBA ID : 1-QLE2742
HBA Alias :
HBA Port : 1
Port Alias :
Node Name : 20-00-00-24-FF-8F-D7-F4
Port Name : 21-00-00-24-FF-8F-D7-F4