Users Guide

4–General Noninteractive Commands
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 21 Copyright © 2021 Marvell
<lun id> - Logical Unit Number of a LUN.
<lunname> - The udev persistent device name to be assigned to
a designated LUN (Linux only).
Options:
[int] - Interactive mode (Menu driven).
-i [<all>] [vpd] - Views the general or vpd information of all HBAs.
-i <hba instance>|<hba wwpn> [vpd]
- Displays general/VPD information of an HBA port.
-c [<all>] - Displays current HBA Parameter settings of all HBAs.
-c <hba instance>|<hba wwpn>
- Displays current HBA Parameters settings of an HBA
port.
-n <hba instance>|<hba wwpn> {<param name>|<param alias> <param value>}
- Modifies current HBA parameter settings of an HBA
port.
-n <hba instance>|<hba wwpn>|<all> default
- Restores factory default HBA parameter settings of
an HBA port
Note: This option is not supported with 2Gb HBAs.
-n <hba instance>|<hba wwpn>|<all> <OEM name>
- Updates current HBA parameter settings of an HBA port
using a pre-defined OEM default templates.
Options:
<param name> See supported parameter name (Table 1).
<param alias> See supported parameter alias (Table 1).
<param value> See supported parameter value (Table 1).
-t [<all>] - Displays information of devices (Disks or
or Tapes) attached to all HBAs.
-t <hba instance>|<hba wwpn>
- Displays information of devices (Disks or Tapes)
attached to an HBA port.
-t <hba instance>|<hba wwpn> <target wwpn>|<target portid>