Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I General CLI Information
- Part II Noninteractive Commands
- 4 General Noninteractive Commands
- 5 Fibre Channel Noninteractive Commands
- Displaying System Information (Command Line Options -g, -z)
- Command Format
- Command Summary
- -a
- -b (Flash Update; Save Flash)
- -bbcr (BB Credit Recovery)
- -c (Display HBA Parameters)
- -ctp (CT Ping Test)
- -d (Driver Update)
- -dm (Transceiver Diagnostics Monitoring Interface [DMI])
- -dp (Diagnostic Port Test)
- -dport (Diagnostics Port)
- -e (Boot Devices Configuration)
- -ei
- -f
- -fcep (Diagnostics FC Ping [ELS Echo Ping])
- -fcp (Ping Test)
- -fec (FEC Enable/Disable)
- -fg (Display Driver Persistent Binding Settings)
- -ftr (CT FTR Test)
- -fs (Driver Parameters)
- -fwdump (Firmware Dump)
- -g
- -gs (Configure Parameters [Monitoring])
- -h (Help)
- -ha (Adapter Alias [FCoE Configuration])
- -i (FC Adapter Information; FC VPD Information; FC VFC Information)
- -kl (Loopback Test)
- -kr (Read Write Buffer Test)
- -l (FC Target/LUN Information)
- -ls (Display Parameters [HBA Statistics]; Link Status)
- -m (Selective LUNs)
- -mbiv (Flash/MBI Information)
- -n (Configure HBA Parameters)
- -o (Redirect Standard Output To a File)
- -p (Target Persistent Bindings)
- -pa (Adapter Port Alias [FCoE Configuration])
- -pc (Adapter Personality Change)
- -pl (Persistent Names [udev] – Linux only)
- -q (Target Link Speed [iiDMA])
- -qos (Quality of Service [QoS])
- -r (Parameters Update; Save HBA Parameters)
- -rdp (Read Diagnostics Parameter)
- -s (Suppress Output [Silent Mode])
- -scm (Congestion Management)
- -sp (FC Board Config Update)
- -t (FC Target/LUN Information)
- -tb (Target Beacon)
- -tm (Temperature Monitor)
- -tp (Topology)
- -trace (FCE Trace)
- -u (Firmware Preload Table Update)
- -v (QCC CLI Version Information)
- -vp (Virtual Ports [NPIV])
- -x (XML Output [Legacy])
- -x2 (XML Output)
- -z (All Information)
- Part III Interactive Commands
- 6 Fibre Channel Interactive Commands
- Adapter Information
- Adapter Configuration
- Adapter Alias (-ha)
- Adapter Port Alias (-pa)
- HBA Parameters
- Target Persistent Binding (-p)
- Persistent Names (-pl)
- Boot Devices Configuration
- Virtual Ports (NPIV) (-vp)
- Target Link Speed (iiDMA)) (-q)
- Driver Parameters (-fs)
- Selective LUNs (-m)
- Quality of Service (QoS) (-qos)
- Export (Save) Configuration
- Generate Reports
- Personality (-pc)
- FEC (-fec)
- BB Credit Recovery (-bbcr)
- Adapter Updates
- Adapter Diagnostics
- Monitoring
- Refresh
- Help (-h)
- Exit
- A Revision History
- 6 Fibre Channel Interactive Commands
- Glossary
6–Fibre Channel Interactive Commands
FC Ping Test
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 184 Copyright © 2021 Marvell
Configure
4. Adapter Diagnostics2. Fibre Channel Adapter11. FC Ping Test 3. Configure
From the FC Ping Test menu, select Configure to select from the following
options for the ping test:
1: Display Settings
2: Destination WWN
3: Payload Patterns
4: Payload Size
5: Number Of Ping(s)
6: Interval(s)
Run
4. Adapter Diagnostics2. Fibre Channel Adapter11. FC Ping Test 4. Run
From the FC Ping Test menu, select Run to execute the ping test. The following
shows example output from the test:
------------------------------------------------------------------------------
HBA Instance 0: QLE2740 Port 1 WWPN 21-00-00-24-FF-00-27-D5 PortID 02-05-00
Link: Online (FEC)
------------------------------------------------------------------------------
--------------------
Diagnostics Settings
--------------------
Diagnostic Mode : FC Ping ELS Echo
Destination WWN : 10-00-00-27-F8-F1-66-A0
Data Pattern : CRPAT (192B)
Data Size (Bytes) : 8
Number of Echo Request : N/A
Wait Interval (Seconds) : 10
Abort On Error : Ignore
------------------------------------------------------------------------------
----------------------- ------ ------ -------- -------- --------- -------
Destination Ping Frame Frame Response Response Echo
WWN Seq. Sent Received Length Time Status
----------------------- ------ ------ -------- -------- --------- -------
10-00-00-27-F8-F1-66-A0 1 1 1 12 0.00 ms Success
----------------------- ------ ------ -------- -------- --------- -------
Destination Ping Frame Frame Response Response Echo
WWN Seq. Sent Received Length Time Status