Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I General CLI Information
- Part II Noninteractive Commands
- 4 General Noninteractive Commands
- 5 Fibre Channel Noninteractive Commands
- Displaying System Information (Command Line Options -g, -z)
- Command Format
- Command Summary
- -a
- -b (Flash Update; Save Flash)
- -bbcr (BB Credit Recovery)
- -c (Display HBA Parameters)
- -ctp (CT Ping Test)
- -d (Driver Update)
- -dm (Transceiver Diagnostics Monitoring Interface [DMI])
- -dp (Diagnostic Port Test)
- -dport (Diagnostics Port)
- -e (Boot Devices Configuration)
- -ei
- -f
- -fcep (Diagnostics FC Ping [ELS Echo Ping])
- -fcp (Ping Test)
- -fec (FEC Enable/Disable)
- -fg (Display Driver Persistent Binding Settings)
- -ftr (CT FTR Test)
- -fs (Driver Parameters)
- -fwdump (Firmware Dump)
- -g
- -gs (Configure Parameters [Monitoring])
- -h (Help)
- -ha (Adapter Alias [FCoE Configuration])
- -i (FC Adapter Information; FC VPD Information; FC VFC Information)
- -kl (Loopback Test)
- -kr (Read Write Buffer Test)
- -l (FC Target/LUN Information)
- -ls (Display Parameters [HBA Statistics]; Link Status)
- -m (Selective LUNs)
- -mbiv (Flash/MBI Information)
- -n (Configure HBA Parameters)
- -o (Redirect Standard Output To a File)
- -p (Target Persistent Bindings)
- -pa (Adapter Port Alias [FCoE Configuration])
- -pc (Adapter Personality Change)
- -pl (Persistent Names [udev] – Linux only)
- -q (Target Link Speed [iiDMA])
- -qos (Quality of Service [QoS])
- -r (Parameters Update; Save HBA Parameters)
- -rdp (Read Diagnostics Parameter)
- -s (Suppress Output [Silent Mode])
- -scm (Congestion Management)
- -sp (FC Board Config Update)
- -t (FC Target/LUN Information)
- -tb (Target Beacon)
- -tm (Temperature Monitor)
- -tp (Topology)
- -trace (FCE Trace)
- -u (Firmware Preload Table Update)
- -v (QCC CLI Version Information)
- -vp (Virtual Ports [NPIV])
- -x (XML Output [Legacy])
- -x2 (XML Output)
- -z (All Information)
- Part III Interactive Commands
- 6 Fibre Channel Interactive Commands
- Adapter Information
- Adapter Configuration
- Adapter Alias (-ha)
- Adapter Port Alias (-pa)
- HBA Parameters
- Target Persistent Binding (-p)
- Persistent Names (-pl)
- Boot Devices Configuration
- Virtual Ports (NPIV) (-vp)
- Target Link Speed (iiDMA)) (-q)
- Driver Parameters (-fs)
- Selective LUNs (-m)
- Quality of Service (QoS) (-qos)
- Export (Save) Configuration
- Generate Reports
- Personality (-pc)
- FEC (-fec)
- BB Credit Recovery (-bbcr)
- Adapter Updates
- Adapter Diagnostics
- Monitoring
- Refresh
- Help (-h)
- Exit
- A Revision History
- 6 Fibre Channel Interactive Commands
- Glossary
6–Fibre Channel Interactive Commands
Quality of Service (QoS) (-qos)
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 142 Copyright © 2021 Marvell
WWNN : 20-00-F4-E9-D3-F1-BB-45
Config Lockdown: Disable
Link : Online (FEC)
=======================================================
1: LUN 0
Vendor : SANBlaze
Product ID : VLUN FC RAMDisk
Port Name : 2F-FF-00-06-2B-0E-B2-44
Port ID : C5-07-00
2: All LUNs
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
------------------------------------------------------------------------------
HBA Instance 0: QLE8362 Port 1 WWPN 21-00-00-0E-1E-08-09-10 PortID C5-0D-A5
Link: Online
------------------------------------------------------------------------------
Enable Type Target/LUN Info Port Name LUN ID
------ -------- ----------------------- ----------------------- ------
Yes Disk SANBlaze VLUN FC RAMDisk 2F-FF-00-06-2B-0E-B2-44 0
Press <Enter> to continue: 0
Manual Configure LUNs
2. Adapter Configuration2. FC Adapter Configuration9. Selective LUNs2. Manual Configure LUNs
From the Selective LUNs Menu, select the Manual Configure LUNs option and
follow the prompts to manually configure LUNs.
Auto Configure LUNs
2. Adapter Configuration2. FC Adapter Configuration9. Selective LUNs3. Auto Configure LUNs
From the Selective LUNs Menu, select the Auto Configure LUNs option and
select either 1 to enable or 2 to disable automatic configuration of LUNs.
Quality of Service (QoS) (-qos)
2. Adapter Configuration2. FC Adapter Configuration10. QoS
NOTE
Quality of service applies to adapters on Windows systems only.