Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I General CLI Information
- Part II Noninteractive Commands
- 4 General Noninteractive Commands
- 5 Fibre Channel Noninteractive Commands
- Displaying System Information (Command Line Options -g, -z)
- Command Format
- Command Summary
- -a
- -b (Flash Update; Save Flash)
- -bbcr (BB Credit Recovery)
- -c (Display HBA Parameters)
- -ctp (CT Ping Test)
- -d (Driver Update)
- -dm (Transceiver Diagnostics Monitoring Interface [DMI])
- -dp (Diagnostic Port Test)
- -dport (Diagnostics Port)
- -e (Boot Devices Configuration)
- -ei
- -f
- -fcep (Diagnostics FC Ping [ELS Echo Ping])
- -fcp (Ping Test)
- -fec (FEC Enable/Disable)
- -fg (Display Driver Persistent Binding Settings)
- -ftr (CT FTR Test)
- -fs (Driver Parameters)
- -fwdump (Firmware Dump)
- -g
- -gs (Configure Parameters [Monitoring])
- -h (Help)
- -ha (Adapter Alias [FCoE Configuration])
- -i (FC Adapter Information; FC VPD Information; FC VFC Information)
- -kl (Loopback Test)
- -kr (Read Write Buffer Test)
- -l (FC Target/LUN Information)
- -ls (Display Parameters [HBA Statistics]; Link Status)
- -m (Selective LUNs)
- -mbiv (Flash/MBI Information)
- -n (Configure HBA Parameters)
- -o (Redirect Standard Output To a File)
- -p (Target Persistent Bindings)
- -pa (Adapter Port Alias [FCoE Configuration])
- -pc (Adapter Personality Change)
- -pl (Persistent Names [udev] – Linux only)
- -q (Target Link Speed [iiDMA])
- -qos (Quality of Service [QoS])
- -r (Parameters Update; Save HBA Parameters)
- -rdp (Read Diagnostics Parameter)
- -s (Suppress Output [Silent Mode])
- -scm (Congestion Management)
- -sp (FC Board Config Update)
- -t (FC Target/LUN Information)
- -tb (Target Beacon)
- -tm (Temperature Monitor)
- -tp (Topology)
- -trace (FCE Trace)
- -u (Firmware Preload Table Update)
- -v (QCC CLI Version Information)
- -vp (Virtual Ports [NPIV])
- -x (XML Output [Legacy])
- -x2 (XML Output)
- -z (All Information)
- Part III Interactive Commands
- 6 Fibre Channel Interactive Commands
- Adapter Information
- Adapter Configuration
- Adapter Alias (-ha)
- Adapter Port Alias (-pa)
- HBA Parameters
- Target Persistent Binding (-p)
- Persistent Names (-pl)
- Boot Devices Configuration
- Virtual Ports (NPIV) (-vp)
- Target Link Speed (iiDMA)) (-q)
- Driver Parameters (-fs)
- Selective LUNs (-m)
- Quality of Service (QoS) (-qos)
- Export (Save) Configuration
- Generate Reports
- Personality (-pc)
- FEC (-fec)
- BB Credit Recovery (-bbcr)
- Adapter Updates
- Adapter Diagnostics
- Monitoring
- Refresh
- Help (-h)
- Exit
- A Revision History
- 6 Fibre Channel Interactive Commands
- Glossary
6–Fibre Channel Interactive Commands
Target Link Speed (iiDMA)) (-q)
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 135 Copyright © 2021 Marvell
1: View vPorts Info
2: Create vPorts
3: Delete vPorts
Target Link Speed (iiDMA)) (-q)
2. Adapter Configuration2. FC Adapter Configuration7. Target Link Speed (iiDMA)
From the FC Adapter Configuration menu, select the Target Link Speed (iiDMA)
option. From the port menu, select a port to open the iiDMA Menu with options for
basic and advanced configuration. For example:
iiDMA Menu
=======================================================
HBA : 0 Port: 1
SN : AFD1923Y07510
HBA Model : QLE2770
HBA Desc. : QLogic QLE2770 1x32Gb QLE2770 FC HBA
FW Version : 9.06.00
WWPN : 21-00-34-80-0D-3B-89-B0
WWNN : 20-00-34-80-0D-3B-89-B0
Link : Online
=======================================================
1: Basic Configuration
2: Advance Configuration
Basic Configuration
2. Adapter Configuration2. FC Adapter Configuration7. Target Link Speed (iiDMA)1. Basic Configuration
From the iiDMA Menu, select the Basic Configuration option to specify the link
speed. For example:
iiDMA Menu (Basic)
=======================================================
HBA : 0 Port: 1
SN : AFD1923Y07510
HBA Model : QLE2770
HBA Desc. : QLogic QLE2770 1x32Gb QLE2770 FC HBA
FW Version : 9.06.00
WWPN : 21-00-34-80-0D-3B-89-B0
WWNN : 20-00-34-80-0D-3B-89-B0