Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I General CLI Information
- Part II Noninteractive Commands
- 4 General Noninteractive Commands
- 5 Fibre Channel Noninteractive Commands
- Displaying System Information (Command Line Options -g, -z)
- Command Format
- Command Summary
- -a
- -b (Flash Update; Save Flash)
- -bbcr (BB Credit Recovery)
- -c (Display HBA Parameters)
- -ctp (CT Ping Test)
- -d (Driver Update)
- -dm (Transceiver Diagnostics Monitoring Interface [DMI])
- -dp (Diagnostic Port Test)
- -dport (Diagnostics Port)
- -e (Boot Devices Configuration)
- -ei
- -f
- -fcep (Diagnostics FC Ping [ELS Echo Ping])
- -fcp (Ping Test)
- -fec (FEC Enable/Disable)
- -fg (Display Driver Persistent Binding Settings)
- -ftr (CT FTR Test)
- -fs (Driver Parameters)
- -fwdump (Firmware Dump)
- -g
- -gs (Configure Parameters [Monitoring])
- -h (Help)
- -ha (Adapter Alias [FCoE Configuration])
- -i (FC Adapter Information; FC VPD Information; FC VFC Information)
- -kl (Loopback Test)
- -kr (Read Write Buffer Test)
- -l (FC Target/LUN Information)
- -ls (Display Parameters [HBA Statistics]; Link Status)
- -m (Selective LUNs)
- -mbiv (Flash/MBI Information)
- -n (Configure HBA Parameters)
- -o (Redirect Standard Output To a File)
- -p (Target Persistent Bindings)
- -pa (Adapter Port Alias [FCoE Configuration])
- -pc (Adapter Personality Change)
- -pl (Persistent Names [udev] – Linux only)
- -q (Target Link Speed [iiDMA])
- -qos (Quality of Service [QoS])
- -r (Parameters Update; Save HBA Parameters)
- -rdp (Read Diagnostics Parameter)
- -s (Suppress Output [Silent Mode])
- -scm (Congestion Management)
- -sp (FC Board Config Update)
- -t (FC Target/LUN Information)
- -tb (Target Beacon)
- -tm (Temperature Monitor)
- -tp (Topology)
- -trace (FCE Trace)
- -u (Firmware Preload Table Update)
- -v (QCC CLI Version Information)
- -vp (Virtual Ports [NPIV])
- -x (XML Output [Legacy])
- -x2 (XML Output)
- -z (All Information)
- Part III Interactive Commands
- 6 Fibre Channel Interactive Commands
- Adapter Information
- Adapter Configuration
- Adapter Alias (-ha)
- Adapter Port Alias (-pa)
- HBA Parameters
- Target Persistent Binding (-p)
- Persistent Names (-pl)
- Boot Devices Configuration
- Virtual Ports (NPIV) (-vp)
- Target Link Speed (iiDMA)) (-q)
- Driver Parameters (-fs)
- Selective LUNs (-m)
- Quality of Service (QoS) (-qos)
- Export (Save) Configuration
- Generate Reports
- Personality (-pc)
- FEC (-fec)
- BB Credit Recovery (-bbcr)
- Adapter Updates
- Adapter Diagnostics
- Monitoring
- Refresh
- Help (-h)
- Exit
- A Revision History
- 6 Fibre Channel Interactive Commands
- Glossary
6–Fibre Channel Interactive Commands
FC Flash Information
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 109 Copyright © 2021 Marvell
4: Port 2: WWPN: 21-00-00-0E-1E-08-B7-C1 SFP not installed
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
------------------------------------------------------------
Computer Name : RPDL360GEN8
SAN Name : Hilda_vFC_P1
------------------------------------------------------------
Virtual Machine Name : RPDL360GEN8
Virtual ID Name : RPDL360GEN8
Synthetic WWPN Set A : C0-03-FF-C8-95-DB-00-10
Synthetic WWNN Set A : C0-03-FF-00-00-FF-FF-00
Synthetic WWPN Set B : C0-03-FF-C8-95-DB-00-11
Synthetic WWNN Set B : C0-03-FF-00-00-FF-FF-00
Synthetic FC Element Name: Fibre Channel Adapter
Synthetic FC Instance ID :
Microsoft:8CAEDDD7-D9FA-4E3E-9818-CE422939BA8D\726C74
CC-6C46-409A-889E-CA96C06400B1
Hit <Enter> to continue:
FC Flash Information
1. Adapter Information6. FC Flash Information
From the FC Adapter Information menu, select FC Flash Information to view the
record (MBI version and tool) of the last update performed on the adapter.
This feature is supported on QLE266x, QLE269x, QLE274x, QLE276x, QLE277x,
adapters.
Adapter Flash Information
1: HBA Model: QLE2770 SN: AFD1923Y07510
Port 1 WWPN: 21-00-34-80-0D-3B-89-B0 Online
2: HBA Model: QLE2692 SN: RFD1610K18231
Port 1 WWPN: 21-00-00-24-FF-75-2B-9C Online (FEC)
Port 2 WWPN: 21-00-00-24-FF-75-2B-9D Unsupported
SFP Vendor
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
---------------------------
QLE2692 (SN RFD1610K18231)