Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I General CLI Information
- Part II Noninteractive Commands
- 4 General Noninteractive Commands
- 5 Fibre Channel Noninteractive Commands
- Displaying System Information (Command Line Options -g, -z)
- Command Format
- Command Summary
- -a
- -b (Flash Update; Save Flash)
- -bbcr (BB Credit Recovery)
- -c (Display HBA Parameters)
- -ctp (CT Ping Test)
- -d (Driver Update)
- -dm (Transceiver Diagnostics Monitoring Interface [DMI])
- -dp (Diagnostic Port Test)
- -dport (Diagnostics Port)
- -e (Boot Devices Configuration)
- -ei
- -f
- -fcep (Diagnostics FC Ping [ELS Echo Ping])
- -fcp (Ping Test)
- -fec (FEC Enable/Disable)
- -fg (Display Driver Persistent Binding Settings)
- -ftr (CT FTR Test)
- -fs (Driver Parameters)
- -fwdump (Firmware Dump)
- -g
- -gs (Configure Parameters [Monitoring])
- -h (Help)
- -ha (Adapter Alias [FCoE Configuration])
- -i (FC Adapter Information; FC VPD Information; FC VFC Information)
- -kl (Loopback Test)
- -kr (Read Write Buffer Test)
- -l (FC Target/LUN Information)
- -ls (Display Parameters [HBA Statistics]; Link Status)
- -m (Selective LUNs)
- -mbiv (Flash/MBI Information)
- -n (Configure HBA Parameters)
- -o (Redirect Standard Output To a File)
- -p (Target Persistent Bindings)
- -pa (Adapter Port Alias [FCoE Configuration])
- -pc (Adapter Personality Change)
- -pl (Persistent Names [udev] – Linux only)
- -q (Target Link Speed [iiDMA])
- -qos (Quality of Service [QoS])
- -r (Parameters Update; Save HBA Parameters)
- -rdp (Read Diagnostics Parameter)
- -s (Suppress Output [Silent Mode])
- -scm (Congestion Management)
- -sp (FC Board Config Update)
- -t (FC Target/LUN Information)
- -tb (Target Beacon)
- -tm (Temperature Monitor)
- -tp (Topology)
- -trace (FCE Trace)
- -u (Firmware Preload Table Update)
- -v (QCC CLI Version Information)
- -vp (Virtual Ports [NPIV])
- -x (XML Output [Legacy])
- -x2 (XML Output)
- -z (All Information)
- Part III Interactive Commands
- 6 Fibre Channel Interactive Commands
- Adapter Information
- Adapter Configuration
- Adapter Alias (-ha)
- Adapter Port Alias (-pa)
- HBA Parameters
- Target Persistent Binding (-p)
- Persistent Names (-pl)
- Boot Devices Configuration
- Virtual Ports (NPIV) (-vp)
- Target Link Speed (iiDMA)) (-q)
- Driver Parameters (-fs)
- Selective LUNs (-m)
- Quality of Service (QoS) (-qos)
- Export (Save) Configuration
- Generate Reports
- Personality (-pc)
- FEC (-fec)
- BB Credit Recovery (-bbcr)
- Adapter Updates
- Adapter Diagnostics
- Monitoring
- Refresh
- Help (-h)
- Exit
- A Revision History
- 6 Fibre Channel Interactive Commands
- Glossary
6–Fibre Channel Interactive Commands
FC Port Information
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 103 Copyright © 2021 Marvell
Firmware Update Lockdown : Disabled
MPI Lockdown : Disabled
HBA Status : Online (FEC)
--------------------------------------------------------------------------------
Hit <Enter> to continue:
The following parameters are part of the System Lockdown Mode feature, which is
set through the Dell Management Console Dashboard.
Config Lockdown
When this parameter is enabled, changes to the adapter configuration are
not permitted; for example, boot devices, BB credit, NVRAM settings, and so
on. The default is disabled (adapter configuration is allowed).
Firmware Update Lockdown
When this parameter is enabled (default), a flash update is not allowed.
When this parameter is disabled, flash updates are allowed.
MPI Lockdown
When this parameter is enabled, MPI functionality (sideband management)
is not allowed. The default is disabled (MPI functionality is enabled/in use).
FC Port Information
1. Adapter Information2. FC Port Information
From the FC Adapter Information menu, select the FC Port Information option.
From the Adapter Port Information menu, select a port for which to view port
information.
--------------------------------------------------------------------------------
Adapter Information
HBA Model QLE2770 SN: AFD1923Y07510
1: Port 1: WWPN: 21-00-34-80-0D-3B-89-B0 Online
HBA Model QLE2692 SN: RFD1610K18231
2: Port 1: WWPN: 21-00-00-24-FF-75-2B-9C Online (FEC)
3: Port 2: WWPN: 21-00-00-24-FF-75-2B-9D Unsupported SFP Vendor
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
--------------------------------------------------------------------------------
Host Name : WIN-HQS1LTLMGPD