Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I General CLI Information
- Part II Noninteractive Commands
- 4 General Noninteractive Commands
- 5 Fibre Channel Noninteractive Commands
- Displaying System Information (Command Line Options -g, -z)
- Command Format
- Command Summary
- -a
- -b (Flash Update; Save Flash)
- -bbcr (BB Credit Recovery)
- -c (Display HBA Parameters)
- -ctp (CT Ping Test)
- -d (Driver Update)
- -dm (Transceiver Diagnostics Monitoring Interface [DMI])
- -dp (Diagnostic Port Test)
- -dport (Diagnostics Port)
- -e (Boot Devices Configuration)
- -ei
- -f
- -fcep (Diagnostics FC Ping [ELS Echo Ping])
- -fcp (Ping Test)
- -fec (FEC Enable/Disable)
- -fg (Display Driver Persistent Binding Settings)
- -ftr (CT FTR Test)
- -fs (Driver Parameters)
- -fwdump (Firmware Dump)
- -g
- -gs (Configure Parameters [Monitoring])
- -h (Help)
- -ha (Adapter Alias [FCoE Configuration])
- -i (FC Adapter Information; FC VPD Information; FC VFC Information)
- -kl (Loopback Test)
- -kr (Read Write Buffer Test)
- -l (FC Target/LUN Information)
- -ls (Display Parameters [HBA Statistics]; Link Status)
- -m (Selective LUNs)
- -mbiv (Flash/MBI Information)
- -n (Configure HBA Parameters)
- -o (Redirect Standard Output To a File)
- -p (Target Persistent Bindings)
- -pa (Adapter Port Alias [FCoE Configuration])
- -pc (Adapter Personality Change)
- -pl (Persistent Names [udev] – Linux only)
- -q (Target Link Speed [iiDMA])
- -qos (Quality of Service [QoS])
- -r (Parameters Update; Save HBA Parameters)
- -rdp (Read Diagnostics Parameter)
- -s (Suppress Output [Silent Mode])
- -scm (Congestion Management)
- -sp (FC Board Config Update)
- -t (FC Target/LUN Information)
- -tb (Target Beacon)
- -tm (Temperature Monitor)
- -tp (Topology)
- -trace (FCE Trace)
- -u (Firmware Preload Table Update)
- -v (QCC CLI Version Information)
- -vp (Virtual Ports [NPIV])
- -x (XML Output [Legacy])
- -x2 (XML Output)
- -z (All Information)
- Part III Interactive Commands
- 6 Fibre Channel Interactive Commands
- Adapter Information
- Adapter Configuration
- Adapter Alias (-ha)
- Adapter Port Alias (-pa)
- HBA Parameters
- Target Persistent Binding (-p)
- Persistent Names (-pl)
- Boot Devices Configuration
- Virtual Ports (NPIV) (-vp)
- Target Link Speed (iiDMA)) (-q)
- Driver Parameters (-fs)
- Selective LUNs (-m)
- Quality of Service (QoS) (-qos)
- Export (Save) Configuration
- Generate Reports
- Personality (-pc)
- FEC (-fec)
- BB Credit Recovery (-bbcr)
- Adapter Updates
- Adapter Diagnostics
- Monitoring
- Refresh
- Help (-h)
- Exit
- A Revision History
- 6 Fibre Channel Interactive Commands
- Glossary
6–Fibre Channel Interactive Commands
FC Adapter Information (-i)
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 101 Copyright © 2021 Marvell
--------------------------------------------------------------------------------
Hit <Enter> to continue:
2770 Series Fibre Channel Adapters:
QConvergeConsole
CLI - Version x.y.z (Build xx)
Adapter Information
HBA Model QLE2772 SN: AFD1915Y07299
1: Port 1: WWPN: 21-00-F4-E9-D4-54-AB-12 Online (FEC)
2: Port 2: WWPN: 21-00-F4-E9-D4-54-AB-14 Online (FEC)
HBA Model QLE2562 SN: GFC0819H89417
3: Port 1: WWPN: 21-00-00-1B-32-0C-A9-0B SFP not present
4: Port 2: WWPN: 21-01-00-1B-32-2C-A9-0B SFP not present
HBA Model QLE2672 SN: RFE1303H21665
5: Port 1: WWPN: 21-00-00-0E-1E-11-60-D0 Online
6: Port 2: WWPN: 21-00-00-0E-1E-11-60-D1 SFP not present
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
--------------------------------------------------------------------------------
Host Name : localhost
Host NQN
1
:
HBA Instance : 4
HBA Model : QLE2772
HBA Description : QLogic QLE2772 2x32Gb QLE2772 FC HBA
HBA ID : 4-QLE2772
HBA Alias :
HBA Port : 1
Port Alias :
Node Name : 20-00-F4-E9-D4-54-AB-12
Port Name : 21-00-F4-E9-D4-54-AB-12
1
Host NQN appears only for 2600 Series Adapter models QLE2690, QLE2692, QLE2964,
QLE2964L, and 2700 Series Adapter models QLE2740, QLE2742, QLE2764, QLE2770, QLE2772,
QLE2774 on which the port link is up. It shows the host NVMe qualified name (NQN) for NVM
Express (NVMe) over Fibre Channel (NVMe-oF)