Users Guide

9–Windows Driver Software
Installing the Driver Software
75 BC0054508-00 J
Using Silent Installation
To perform a silent install from within the installer source folder:
Issue the following command:
setup /s /v/qn
To perform a silent upgrade from within the installer source folder:
Issue the following command:
setup /s /v/qn
To perform a silent reinstall of the same installer:
Issue the following command:
setup /s /v"/qn REINSTALL=ALL"
Offload iSCSI (OIS)
Windows Server 2008 No No
Windows Server 2008 R2 No No
Windows Server 2012 and
later
No No
NOTE
 All commands are case sensitive.
 For detailed instructions and information about unattended installs, refer
to the silent.txt file in the
Driver_Management_Apps_Installer folder.
NOTE
The REINSTALL switch should only be used if the same installer is already
installed on the system. If upgrading an earlier version of the installer, use
setup /s /v/qn as listed in the preceding.
Table 9-1. Windows Operating Systems and
iSCSI Crash Dump (Continued)
Operating System
MS iSCSI Software
Initiator Required?
Microsoft Patch (MS
KB939875) Required?