Users Guide

7–Linux Driver Software
Driver Messages
50 BC0054508-00 J
TSO: Enabled
WoL: Disabled
Driver Messages
The following are the most common sample messages that may be logged in the
/var/log/messages file. Issue the dmesg -n <level> command to control
the level at which messages appear on the console. Most systems are set to
level 6 by default. To see all messages, set the level higher.
 bnx2x Driver Messages
 bnx2i Driver Messages
 bnx2fc Driver Messages
bnx2x Driver Messages
The bnx2x driver messages include the following.
Driver Sign On
QLogic BCM57xx and BCM57xxx 10 Gigabit Ethernet Driver bnx2x
v1.6.3c (July 23, 2007)
C-NIC Driver Sign On (bnx2 only)
QLogic BCM57xx and BCM57xxx cnic v1.1.19 (Sep 25, 2007)
NIC Detected
eth#: QLogic BCM57xx and BCM57xxx xGb (B1)
PCI-E x8 found at mem f6000000, IRQ 16, node addr 0010180476ae
cnic: Added CNIC device: eth0
Link Up and Speed Indication
bnx2x: eth# NIC Link is Up, 10000 Mbps full duplex
Link Down Indication
bnx2x: eth# NIC Link is Down
MSI-X Enabled Successfully
bnx2x: eth0: using MSI-X