Users Guide

7–Linux Driver Software
Driver Defaults
48 BC0054508-00 J
ooo_enable
The Enable TCP out-of-order feature enables and disables TCP out-of-order RX
handling feature on offloaded iSCSI connections.
Default: TCP out-of-order feature is ENABLED. For example:
insmod bnx2i.ko ooo_enable=1
or
modprobe bnx2i ooo_enable=1
bnx2fc Driver Parameters
You can supply the optional parameter debug_logging as a command line
argument to the insmod or modprobe command for bnx2fc.
debug_logging
The bit mask to enable debug logging enables and disables driver debug logging.
Default: None. For example:
insmod bnx2fc.ko debug_logging=0xff
or
modprobe bnx2fc debug_logging=0xff
I/O level debugging = 0x1
Session level debugging = 0x2
HBA level debugging = 0x4
ELS debugging = 0x8
Misc debugging = 0x10
Max debugging = 0xff
Driver Defaults
Default settings for the drivers are described in the following sections:
 bnx2 Driver Defaults
 bnx2x Driver Defaults
bnx2 Driver Defaults
Speed: Autonegotiation with all speeds advertised
Flow Control: Autonegotiation with RX and TX advertised
MTU: 1500 (range is 46–9000)