Users Guide

6–Boot Agent Driver Software
Setting Up MBA in a Client Environment
31 BC0054508-00 J
5. In the NIC Configuration page (see Figure 6-5), use the Legacy Boot
Protocol drop-down menu to select the boot protocol of choice, if boot
protocols other than Preboot Execution Environment (PXE) are available.
If available, other boot protocols include iSCSI and FCoE. The BCM57xxx’s
1GbE ports support only PXE and iSCSI remote boot.
Figure 6-5. NIC Configuration
6. Press the UP ARROW, DOWN ARROW, LEFT ARROW, and RIGHT
ARROW keys to move to and change the values for other menu items, as
needed.
7. Select Back to go to Main menu
8. Select Finish to save and exit.
NOTE
For iSCSI and FCoE boot-capable LOMs, the boot protocol is set
through the BIOS. See your system documentation for more
information.