Users Guide

14–Fibre Channel Over Ethernet
FCoE Boot from SAN
233 BC0054508-00 J
7. On the Confirm Install window (Figure 14-33), press the F11 key to confirm
the installation and repartition.
Figure 14-33. ESXi Confirm Install
8. After successful installation (Figure 14-34), press ENTER to reboot.
Figure 14-34. ESXi Installation Complete
9. On 57800 and 57810 boards, the management network is not vmnic0. After
booting, open the GUI console and view the Configure Management
Network, and then the Network Adapters window (Figure 14-35) to select
the NIC to be used as the management network device.
Figure 14-35. ESXi Management Network Selection