Users Guide

14–Fibre Channel Over Ethernet
FCoE Boot from SAN
232 BC0054508-00 J
To install ESXi FCoE boot:
1. Boot from the updated ESXi 6.0 U2 installation image and select ESXi 6.0
U2 installer when prompted.
2. On the Welcome to the VMware ESXi installation window, press the ENTER
key to continue.
3. On the EULA window, press the F11 key to accept the agreement and
continue.
4. On the Select a Disk window (Figure 14-31), scroll to the boot LUN for
installation, and then press ENTER to continue.
Figure 14-31. ESXi Disk Selection
5. On the ESXi and VMFS Found window (Figure 14-32), select the installation
method.
Figure 14-32. ESXi and VMFS Found
6. Follow the prompts to:
a. Select the keyboard layout.
b. Enter and confirm the root password.