Users Guide

14–Fibre Channel Over Ethernet
FCoE Boot from SAN
227 BC0054508-00 J
6. Select Add FCoE SAN, and then click Add drive (Figure 14-26).
Figure 14-26. Adding FCoE SAN Drive
7. For each interface intended for FCoE boot, select the interface, clear the
Use DCB check box, select Use auto vlan, and then click Add FCoE
Disk(s) (Figure 14-27).
Figure 14-27. Configuring FCoE Parameters
8. Repeat steps 8 through 10 for all initiator ports.