Users Guide

14–Fibre Channel Over Ethernet
FCoE Boot from SAN
219 BC0054508-00 J
5. Ensure that FCoE Enable is set to yes on the 10GbE QLogic initiator ports
that you want to use as the SAN boot paths (Figure 14-18).
Figure 14-18. Enabling FCoE
6. For each interface to be enabled for FCoE boot:
a. Click Change Settings.
b. On the Change FCoE Settings window (Figure 14-19), ensure that
FCoE Enable and Auto_VLAN are set to yes.
c. Ensure that DCB Required is set to no.
d. Click Next to save the settings.