Users Guide

13–Linux QCS Installation
Installing WS-MAN or CIM-XML on Linux Server
193 BC0054508-00 J
Installing WS-MAN or CIM-XML on Linux Server
Follow these steps to install WS-MAN or CIM-XML on a Linux server:
Step 1: Install OpenPegasus
Step 2: Start CIM Server on the Server
Step 3: Configure OpenPegasus on the Server
Step 4: Install QLogic CMPI Provider
Step 5: Perform Linux Firewall Configuration, if Required
Step 6: Install QCS and Related Management Applications
Step 1: Install OpenPegasus
On the Red Hat Linux OS, two installation options are available:
 From the Inbox RPM (Red Hat Only)
 From Source (Red Hat and SUSE)
On the SUSE Linux Enterprise Server 11 (SLES 11) OS, you must use the source
RPM.
From the Inbox RPM (Red Hat Only)
In Red Hat Linux, an Inbox OpenPegasus RPM is available as
tog-pegasus-<version>.<arch>.rpm.
1. Issue the following command to install tog-pegasus:
rpm -ivh tog-openpegasus-<version>.<arch>.rpm
2. Issue the following command to start Pegasus:
/etc/init.d/tog-pegasus start
NOTE
The Inbox RPM does not support the WS-MAN communication protocol. To
use WS-MAN, you must install OpenPegasus from source.
NOTE
If your system has “Red Hat Security Enhancement for tog-pegasus”
enabled, disable it before connecting to QCS. For details, see the file:
/usr/share/doc/tog-pegasus-2.5.2/README.RedHat.Security
To disable it, remove the line from /etc/pam.d/wbem.