Users Guide

11–QLogic Teaming Services
Teaming Mechanisms
147 BC0054508-00 J
LiveLink
LiveLink is a feature of QLASP that is available for the Smart Load Balancing
(SLB) and SLB (Auto-Fallback Disable) types of teaming. The purpose of LiveLink
is to detect link loss beyond the switch and to route traffic only through team
members that have a live link. This function is accomplished though the teaming
software. The teaming software periodically probes (issues a link packet from
each team member) one or more specified target network devices. The probe
target(s) responds when it receives the link packet. If a team member does not
detect the response within a specified amount of time, this indicates that the link
has been lost, and the teaming software discontinues passing traffic through that
team member. Later, if that team member begins to detect a response from a
probe target, this indicates that the link has been restored, and the teaming
software automatically resumes passing traffic through that team member.
LiveLink works only with TCP/IP.
LiveLink functionality is supported in both 32-bit and 64-bit Windows operating
systems. For similar functionality in Linux operating systems, see the Channel
Bonding information in your Red Hat documentation.
Attributes of the Features Associated with Each Type of Team
The attributes of the features associated with each type of team are summarized
in Tab l e 11 -5.
Table 11-5. Teaming Attributes
Feature Attribute
Smart Load Balancing
User interface QLogic Control Suite (QCS)
Quantity of teams Maximum 16
Quantity of adapters per team Maximum 16
Hot replace Yes
Hot add Yes
Hot remove Yes
Link speed support Different speeds
Frame protocol IP
Incoming packet management QLASP
Outgoing packet management QLASP
LiveLink support Yes