Manualshelf

Users Guide

ManualsBrandsDell ManualsConverged InfrastructureQLogic Family of Adapters
101102103104105106107108109110
10–iSCSI Protocol
iSCSI Boot
83 BC0054508-00 J
Configuring iSCSI Boot Parameters
To configure the iSCSI boot parameters:
1. In the NIC Configuration page, in the Legacy Boot Protocol drop-down
menu, select iSCSI (see Figure 10-1).
Figure 10-1. Legacy Boot Protocol Selection
As shown in Figure 10-1, UEFI is not supported for the iSCSI protocol for the
BCM57xx and BCM57xxx adapters.