Users Guide

6–Configuração de RoCE
Configurar RoCE no adaptador para VMware ESX
94 AH0054602-08 F
Modo RoCE e estatísticas
Para o modo RoCE, o ESXi requer suporte simultâneo de RoCE v1 e v2. A
decisão sobre o modo RoCE a ser usado é feita durante a criação do par de filas.
O driver ESXi informa os dois modos durante o registro e a inicialização. Para ver
as estatísticas de RoCE, use o seguinte comando:
# esxcli rdma device stats get -d vmrdma0
Packets received: 0
Packets sent: 0
Bytes received: 0
Bytes sent: 0
Error packets received: 0
Error packets sent: 0
Error length packets received: 0
Unicast packets received: 0
Multicast packets received: 0
Unicast bytes received: 0
Multicast bytes received: 0
Unicast packets sent: 0
Multicast packets sent: 0
Unicast bytes sent: 0
Multicast bytes sent: 0
Queue pairs allocated: 0
Queue pairs in RESET state: 0
Queue pairs in INIT state: 0
Queue pairs in RTR state: 0
Queue pairs in RTS state: 0
Queue pairs in SQD state: 0
Queue pairs in SQE state: 0
Queue pairs in ERR state: 0
Queue pair events: 0
Completion queues allocated: 1
Completion queue events: 0
Shared receive queues allocated: 0
Shared receive queue events: 0
Protection domains allocated: 1
Memory regions allocated: 3
Address handles allocated: 0
Memory windows allocated: 0