Users Guide

3– アダプター管理アプリケーシ ョ ン
QConvergeConsole による一般的な管理
57 CU0354602-04 M
IPv4 Address :192.168.105.208
Gateway :192.168.105.178
Subnet Mask :255.255.255.0

IPv6 Protocol is currently disabled.
iSNS :Disabled.
*** Displaying ISCSI Settings inst=0 ***
Force_Negotiate_Main_iSCSI_Keys :off
iSCSI_Send_Markers :off(*)
iSCSI_Header_Digests :off
iSCSI_Data_Digests :off
iSCSI_Immediate_Data :on
iSCSI_Initial_R2T :off
iSCSI_Data_Seq_In_Order :on(*)
iSCSI_Data_PDU_In_Order :on(*)
iSCSI_CHAP_Auth :off(*)
iSCSI_Bidi_CHAP_Auth :off(*)
iSCSI_Snack :off
iSCSI_Discovery_Logout :on
iSCSI_Strict_Login :off
iSCSI_Error_Recovery_Level :0(*)
iSCSI_Alias :
*** Displaying Firmware Settings inst=0 ***
FW_Marker :on(*)
FW_Stat_Alarm :off(*)
FW_Accept_AEN :off(*)
FW_Access_Control :off(*)
FW_Session_Mode :on(*)
FW_Initiator_Mode :on(*)
FW_Target_Mode :off(*)
FW_Fast_Posting :off(*)
FW_Sense_Buffer_Desc :off(*)
FW_ZIO_Enable_Mode :off
AFW_Device_Timeouts :on
AFW_Delayed_Ack :off
AFW_AutoConnect :on
*** Displaying Device Settings inst=0 ***
Large_Frames :off
DevType :0(*)
ExeThrottle :0
FirstBurstLen :32
KeepAliveTO :30
DefaultTime2Retain :20(*)
DefaultTime2Wait :2(*)
MaxBurstLen :512
MaxOutstandingR2T :1
MaxRxDataSegmentLen :128(*)
Port :3260(*)
IPv4TOS :0
IPv4TTL :64
*** Displaying Basic Settings inst=0 ***
iSCSI_Discovery_Logout :on
iSCSI_Strict_Login :off
TCP_DHCP :off
TCP_Nagle :off
iSCSI_Alias :