Users Guide

4–Switch Independent Partitioning
Switch Independent Partitioning Setup and Management Options
169 CU0354602-00 M
 Adjusted Overall Bandwidth Assignment: This is a pie chart diagram that
shows the amount of the total bandwidth assigned to the NIC function.
 Current Active Bandwidth Assignment: This lists the current settings for
the Bandwidth Assignment and Maximum Bandwidth parameters. A yellow
background indicates that the new value (in parentheses) has not been
saved yet.
To save your changes, click Save Configuration.
Function Type
Selecting the Type option displays the current function type (NIC) and allows you
to change the function type, as shown in Figure 4-35 and Figure 4-36. To change
the function type, select the new type and click Save Configuration. The new
type takes effect upon the next system reboot.
Figure 4-35. Converged Network Adapter NIC Function 0 or 1—Function Type
NOTE
On 8200 Series Converged Network Adapters:
 PCI functions 0 and 1 are always set to NIC and cannot be reconfigured.
 PCI functions 2 and 3 are configurable as either NIC or Disabled.