Users Guide

4–Switch Independent Partitioning
Switch Independent Partitioning Setup and Management Options
168 CU0354602-00 M
The content pane varies depending on which Function is selected:
 Bandwidth: This setting allows you to display and set the bandwidth
allocation for the NIC function. For detailed information, refer to “Bandwidth
Allocation” on page 168.
 Type: This setting displays the current function type and allows you to
change the function type. For detailed information refer to “Function Type”
on page 169.
Bandwidth Allocation
Selecting the Bandwidth option displays the current bandwidth allocation settings
in the content pane, and allows you to change the settings as you require, as
shown in Figure 4-34.
Figure 4-34. Bandwidth Configuration
The content window is divided into four sections:
 Assign Function Bandwidth: This section contains a slider control used to
set the parameters Bandwidth Weight and Maximum Bandwidth. To set a
parameter, check the appropriate box and drag the slider to the desired
setting. To save the new settings, click Save Configuration.