Users Guide

8–SR-IOV-Konfiguration
Konfigurieren von SR-IOV unter VMware
114 BC0154503-01 F
0000:05:02.3 Network controller: QLogic Corp. QLogic FastLinQ QL41xQL45xxxxx
Series 10/25 GbE Controller (SR-IOV VF) [PF_0.5.0_VF_3]
.
.
.
0000:05:03.7 Network controller: QLogic Corp. QLogic FastLinQ QL45xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.0_VF_15]
0000:05:0e.0 Network controller: QLogic Corp. QLogic FastLinQ QL45xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.1_VF_0]
0000:05:0e.1 Network controller: QLogic Corp. QLogic FastLinQ QL45xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.1_VF_1]
0000:05:0e.2 Network controller: QLogic Corp. QLogic FastLinQ QL45xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.1_VF_2]
0000:05:0e.3 Network controller: QLogic Corp. QLogic FastLinQ QL45xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.1_VF_3]
.
.
.
0000:05:0f.6 Network controller: QLogic Corp. QLogic FastLinQ QL45xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.1_VF_14]
0000:05:0f.7 Network controller: QLogic Corp. QLogic FastLinQ QL45xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.1_VF_15]
13. Verbinden Sie VFs wie folgt mit der VM:
a. Schalten Sie die virtuelle Schnitstelle ein und verbinden Sie die VF.
(Einige Betriebssysteme unterstützen das Anschließen von VFs an die
VM im laufenden Betrieb, also über das Hot-Plug-Verfahren.)
b. Fügen Sie einen Host zur VMware vCenter Server Virtual Appliance
(vCSA) hinzu.
c. Klicken Sie auf die Option Edit Settings (Einstellungen bearbeiten)
der VM.
14. Füllen Sie das Dialogfeld „Edit Settings“ (Einstellungen bearbeiten)
(Abbildung 8-15) wie folgt aus:
a. Wählen Sie im Feld New Device (Neues Gerät) die Option Network
(Netzwerk) aus und klicken Sie dann auf Add (Hinzufügen).
b. Wählen Sie SR-IOV Passthrough (SR-IOV-PassThrough) als
Adapter Type (Adaptertyp) aus.
c. Wählen Sie für Physical Function (Physische Funktion) die QLogic
VF aus.