Users Guide

5–Adapter Preboot Configuration
Configuring iSCSI Boot
56 AH0054602-00 M
Figure 5-10. FCoE Target Configuration
4. Click Back.
5. When prompted, click Yes to save the changes. Changes take effect after a
system reset.
Configuring iSCSI Boot
NOTE
The iSCSI Boot Configuration Menu is only visible if iSCSI Offload Mode is
enabled on the third partition in NPAR mode (see Figure 5-19 on page 65). It
is not visible in non-NPAR mode.
To enable FCoE-Offload mode, see the Application Note, Enabling Storage
Offloads on Dell and Marvell FastLinQ 41000 Series Adapters at
https://www.marvell.com/documents/5aa5otcbkr0im3ynera3/
.