Users Guide

5–Adapter Preboot Configuration
Displaying Firmware Image Properties
48 AH0054602-00 M
Displaying Firmware Image Properties
To view the properties for the firmware image, select Firmware Image Properties
on the Main Configuration Page, and then press ENTER. The Firmware Image
Properties page (Figure 5-5) specifies the following view-only data:
 Family Firmware Version is the multiboot image version, which comprises
several firmware component images.
 MBI Version is the Marvell FastLinQ bundle image version that is active on
the device.
 Controller BIOS Version is the management firmware version.
 EFI Driver Version is the extensible firmware interface (EFI) driver version.
 L2B Firmware Version is the NIC offload firmware version for boot.
Figure 5-5. Firmware Image Properties
FCoE WWPN
b
Manufacturer-assigned permanent device FCoE Offload
WWPN (world wide port name)
FCoE Virtual WWPN
b
User-defined device FCoE Offload WWPN
FCoE WWNN
b
Manufacturer-assigned permanent device FCoE Offload
WWNN (world wide node name)
FCoE Virtual WWNN
b
User-defined device FCoE Offload WWNN
a
This property is visible only if iSCSI Offload is enabled on the NIC Partitioning Configuration page.
b
This property is visible only if FCoE Offload is enabled on the NIC Partitioning Configuration page.
Table 5-1. Adapter Properties (Continued)
Adapter Property Description