Users Guide

4–Upgrading the Firmware
Running the DUP Using the .bin File
42 AH0054602-00 M
Figure 4-5 shows the options that you can use to customize the Dell Update
Package installation.
Figure 4-5. DUP Command Line Options
Running the DUP Using the .bin File
The following procedure is supported only on Linux OS.
To update the DUP using the .bin file:
1. Copy the
Network_Firmware_NJCX1_LN_X.Y.Z.BIN file to the system or
server.
2. Change the file type into an executable file as follows:
chmod 777 Network_Firmware_NJCX1_LN_X.Y.Z.BIN
3. To start the update process, issue the following command:
./Network_Firmware_NJCX1_LN_X.Y.Z.BIN
4. After the firmware is updated, reboot the system.