Users Guide

3–Driver Installation
Installing Windows Driver Software
30 AH0054602-00 M
Link Speed and Duplex
The Speed & Duplex property (on the Advanced tab of the Device Manager) can
be configured to any selection in the Value menu (see Figure 3-12).
Figure 3-12. Setting the Link Speed and Duplex Property
This configuration is effective only when the link control property is set to Driver
controlled (see Figure 3-11).
FEC Mode
FEC mode configuration at the OS level involves three driver advanced
properties.
To set FEC mode:
1. Set Link Control. On the Advanced tab of the Device Manager:
a. In the Property menu, select Link control.
b. In the Value menu, select Driver controlled.
See Figure 3-11 for an example.
2. Set Speed & Duplex. On the Advanced tab of the Device Manager:
a. In the Property menu, select Speed & Duplex.
b. In the Value menu, select a fixed speed.