Users Guide

E–Revision History
304 AH0054602-00 M
In Step 1, updated the second and third bullets to
the currently supported OSs for SLES 12 and
RHEL, respectively.
“RoCE v2 Configuration for Linux” on page 155
Changed Step 4 part b to “
Set the RDMA Proto-
col Support to RoCE/iWARP or iWARP.”
“Preparing the Adapter for iWARP” on page 177
Removed reference to appendix C; added
configuration information.
“Configuring the Dell Z9100 Ethernet Switch for
RoCE” on page 131
Updated list of OSs that support inbox OFED.
“Before You Begin” on page 188
Removed section “iWARP RDMA-Core Sup-
port on SLES 12 SP3 and OFED 4.8x”.
“iWARP Configuration” on page 177
In the bulleted list following the third para-
graph, updated the list of supported OSs (sec-
ond bullet).
“NVMe-oF Configuration with RDMA” on page 235
Clarified Step 4: “To enable RDMA through
PowerShell, issue the following Windows
PowerShell command”.
“Creating a Hyper-V Virtual Switch with an RDMA
NIC” on page 253
In Step 2, corrected the last word of the Power-
Shell command to -ManagementOS.
“Adding a vLAN ID to Host Virtual NIC” on
page 254
Changed the commands in Step 1, part c. Added
an example of ovsdb-server
and
ovs-vswitchd
running with pid.
In Step 4, part c, changed the second paragraph,
second sentence to “
The br1 interface is
named eth0, ens7; manually configure the
static IP through th network device file and
assign the same subnet IP to the peer
(Host 2 VM).”
“Configuring VXLAN in Linux” on page 247
Changed the PowerShell command for monitoring
virtual function traffic on a virtual machine.
“Monitoring Traffic Statistics” on page 272
Changed the link for more information about con-
figuring a cluster witness.
“Step 3. Configuring a Cluster Witness” on
page 277
In the first paragraph, changed the cmdlet to
Enable-ClusterS2D.
“Step 5. Enabling Storage Spaces Direct” on
page 278
In Table A-1, in the Link LED section, updated the
LED Appearance and Network State columns.
“Adapter LEDS” on page 291