Users Guide

E–Revision History
303 AH0054602-00 M
In the bullets following the second paragraph,
added text to further describe Dell iSCSI HW and
SW installation.
“iSCSI Preboot Configuration” on page 68
Moved section to be closer to other relevant sec-
tions.
“Configuring the Storage Target” on page 71
In the first paragraph, corrected the first sentence
to “
The Boot Mode option is listed under NIC
Configuration…”
Added instructions for setting UEFI iSCSI HBA.
“Selecting the iSCSI UEFI Boot Protocol” on
page 72
Removed sections “Configuring iSCSI Boot
Parameters” and “Configuring BIOS Boot Mode”.
“Boot from SAN Configuration” on page 67
Added a reference to Application Note, Enabling
Storage Offloads on Dell and Marvell FastLinQ
41000 Series Adapters.
“FCoE Support” on page 37, “iSCSI Support” on
page 37, “Configuring FCoE Boot” on
page 55,“Configuring iSCSI Boot” on page 56,
“Boot from SAN Configuration” on page 67, “iSCSI
Configuration” on page 200, “FCoE Configuration”
on page 213
In Step 3, clarified how the RoCE v1 Priority values
are used.
“Configuring Data Center Bridging” on page 53
At the end of the section, added a NOTE with an
example of how to install iSCSI BFS in Linux with
an MPIO configuration and a single path active.
“Configuring iSCSI Boot from SAN for RHEL 7.5
and Later” on page 95
Updated the steps for slipstreaming adapter driv-
ers into Windows image files.
“Injecting (Slipstreaming) Adapter Drivers into Win-
dows Image Files” on page 122
Removed the bullet stating that “RoCE does not
work over a VF in an SR-IOV environment.” VF
RDMA is now supported.
“Planning for RoCE” on page 128
In Table 7-1,
Removed RHEL 7.5; added RHEL 7.7. For
RHEL7.6, added support for OFED-4.17-1 GA.
Removed SLES 12 SP3; added SLES 12 SP4.
Separated SLES 15 (SP0) and SLES 15 SP1; in
SLES 15 SP1, added support for OFED-4.17-1
GA.
CentOS 7.6: added support for OFED-4.17-1
GA.
“Supported Operating Systems and OFED” on
page 127
Added information on configuring RoCE for VF
RDMA for Windows and Linux.
“Configuring RoCE for SR-IOV VF Devices (VF
RDMA)” on page 141
Configuring RoCE for SR-IOV VF Devices (VF
RDMA)