Users Guide

15–Windows Server 2016
Configuring VMMQ
269 AH0054602-00 M
Enabling VMMQ on the Adapter
To enable VMMQ on the adapter:
1. Open the miniport properties, and then click the Advanced tab.
2. On the adapter properties’ Advanced page (Figure 15-13) under Property,
select Virtual Switch RSS, and then set the value to Enabled.
3. Click OK.
Figure 15-13. Advanced Properties: Enabling Virtual Switch RSS
Creating a Virtual Machine Switch with or Without SR-IOV
To create a virtual machine switch with or without SR-IOV:
1. Launch the Hyper-V Manager.
2. Select Virtual Switch Manager (see Figure 15-14).
3. In the Name box, type a name for the virtual switch.
4. Under Connection type:
a. Click External network.
b. Select the Allow management operating system to share this
network adapter check box.