Users Guide

15–Windows Server 2016
Configuring VMMQ
268 AH0054602-00 M
OperationalClassifications : Protocol Port/Type Priority
-------- --------- --------
NetDirect 445 5
RemoteTrafficClasses : TC TSA Bandwidth Priorities
-- --- --------- ----------
0 ETS 5% 0-4,6-7
1 ETS 95% 5
RemoteFlowControl : Priority 5 Enabled
RemoteClassifications : Protocol Port/Type Priority
-------- --------- --------
NetDirect 445 5
Configuring VMMQ
Virtual machine multiqueue (VMMQ) configuration information includes:
 Enabling VMMQ on the Adapter
 Creating a Virtual Machine Switch with or Without SR-IOV
 Enabling VMMQ on the Virtual Machine Switch
 Getting the Virtual Machine Switch Capability
 Creating a VM and Enabling VMMQ on VMNetworkAdapters in the VM
 Enabling and Disabling VMMQ on a Management NIC
 Monitoring Traffic Statistics
NOTE
The preceding example is taken when the adapter port is connected to an
Arista 7060X switch. In this example, the switch PFC is enabled on
Priority 5. RoCE App TLVs are defined. The two traffic classes are defined
as TC0 and TC1, where TC1 is defined for RoCE. DCBX Protocol mode is
set to CEE. For Arista switch configuration, refer to “Preparing the Ethernet
Switch” on page 129“. When the adapter is in Willing mode, it accepts
Remote Configuration and shows it as Operational Parameters.