Users Guide

15–Windows Server 2016
Configuring RoCE Interfaces with Hyper-V
254 AH0054602-00 M
3. On the Advanced page (Figure 15-2):
a. Under Property, select Network Direct (RDMA).
b. Under Value, select Enabled.
c. Click OK.
Figure 15-2. Hyper-V Virtual Ethernet Adapter Properties
4. To enable RDMA through PowerShell, issue the following Windows
PowerShell command:
PS C:\Users\Administrator> Enable-NetAdapterRdma "vEthernet
(New Virtual Switch)"
PS C:\Users\Administrator>
Adding a vLAN ID to Host Virtual NIC
To add a vLAN ID to a host virtual NIC:
1. To find the host virtual NIC name, issue the following Windows PowerShell
command:
PS C:\Users\Administrator> Get-VMNetworkAdapter -ManagementOS