Users Guide

12–SR-IOV Configuration
Configuring SR-IOV on VMware
232 AH0054602-00 M
0000:05:0e.3 Network controller: QLogic Corp. QLogic FastLinQ QL41xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.1_VF_3]
.
.
.
0000:05:0f.6 Network controller: QLogic Corp. QLogic FastLinQ QL41xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.1_VF_14]
0000:05:0f.7 Network controller: QLogic Corp. QLogic FastLinQ QL41xxx Series
10/25 GbE Controller (SR-IOV VF) [PF_0.5.1_VF_15]
13. Attach VFs to the VM as follows:
a. Power off the VM and attach the VF. (Some OSs support hot-plugging
of VFs to the VM.)
b. Add a host to a VMware vCenter Server Virtual Appliance (vCSA).
c. Click Edit Settings of the VM.
14. Complete the Edit Settings dialog box (Figure 12-15) as follows:
a. In the New Device box, select Network, and then click Add.
b. For Adapter Type, select SR-IOV Passthrough.
c. For Physical Function, select the Marvell VF.
d. To save your configuration changes and close this dialog box, click
OK.