Users Guide

12–SR-IOV Configuration
Configuring SR-IOV on Linux
225 AH0054602-00 M
7. On the Device Settings page, select Port 1 for the Marvell adapter.
8. On the Device Level Configuration page (Figure 12-9):
a. Set the Virtualization Mode to SR-IOV.
b. Click Back.
Figure 12-9. System Setup for SR-IOV: Integrated Devices
9. On the Main Configuration Page, click Finish, save your settings, and then
reboot the system.
10. To enable and verify virtualization:
a. Open the
grub.conf file and configure the iommu parameter as
shown in Figure 12-10. (For details, see “Enabling IOMMU for SR-IOV
in UEFI-based Linux OS Installations” on page 229.)
 For Intel-based systems, add
intel_iommu=on.
 For AMD-based systems, add
amd_iommu=on.