Users Guide

12–SR-IOV Configuration
Configuring SR-IOV on Windows
219 AH0054602-00 M
9. To enable SR-IOV on the miniport adapter:
a. Access Device Manager.
b. Open the miniport adapter properties, and then click the Advanced
tab.
c. On the Advanced properties page (Figure 12-3) under Property, select
SR-IOV, and then set the value to Enabled.
d. Click OK.
Figure 12-3. Adapter Properties, Advanced: Enabling SR-IOV
10. To create a Virtual Machine Switch (vSwitch) with SR-IOV (Figure 12-4 on
page 220):
a. Launch the Hyper-V Manager.
b. Select Virtual Switch Manager.
c. In the Name box, type a name for the virtual switch.
d. Under Connection type, select External network.
e. Select the Enable single-root I/O virtualization (SR-IOV) check box,
and then click Apply.