Users Guide

12–SR-IOV Configuration
Configuring SR-IOV on Windows
218 AH0054602-00 M
Figure 12-1. System Setup for SR-IOV: Integrated Devices
4. On the Main Configuration Page for the selected adapter, click Device Level
Configuration.
5. On the Main Configuration Page - Device Level Configuration (Figure 12-2):
a. Set the Virtualization Mode to SR-IOV, or NPAR+SR-IOV if you are
using NPAR mode.
b. Click Back.
Figure 12-2. System Setup for SR-IOV: Device Level Configuration
6. On the Main Configuration Page, click Finish.
7. In the Warning - Saving Changes message box, click Yes to save the
configuration.
8. In the Success - Saving Changes message box, click OK.