Users Guide

9–iSER Configuration
Configuring iSER for RHEL
191 AH0054602-00 M
b. To change the transport mode to iSER, issue the iscsiadm
command. For example:
iscsiadm -m node -T iqn.2015-06.test.target1 -o update -n
iface.transport_name -v iser
c. To connect to or log in to the iSER target, issue the iscsiadm
command. For example:
iscsiadm -m node -l -p 192.168.100.99:3260 -T
iqn.2015-06.test.target1
d. Confirm that the Iface Transport is iser in the target connection,
as shown in Figure 9-3. Issue the
iscsiadm command; for example:
iscsiadm -m session -P2
Figure 9-3. Iface Transport Confirmed
e. To check for a new iSCSI device, as shown in Figure 9-4, issue the
lsscsi
command.