Users Guide

9–iSER Configuration
Configuring iSER for RHEL
190 AH0054602-00 M
Figure 9-1 shows an example of a successful RDMA ping.
Figure 9-1. RDMA Ping Successful
8. You can use a Linux TCM-LIO target to test iSER. The setup is the same for
any iSCSI target, except that you issue the command
enable_iser Boolean=true
on the applicable portals. The portal
instances are identified as iser in Figure 9-2.
Figure 9-2. iSER Portal Instances
9. Install Linux iSCSI Initiator Utilities using the
yum install iscsi-initiator-utils
commands.
a. To discover the iSER target, issue the
iscsiadm command. For
example:
iscsiadm -m discovery -t st -p 192.168.100.99:3260