Users Guide

6–Boot from SAN Configuration
FCoE Boot from SAN
124 AH0054602-00 M
4. In the ESXi-Customizer dialog box, click Browse to complete the following.
a. Select the original VMware ESXi ISO file.
b. Select either the Marvell FCoE driver VIB file or the Marvell offline
qedentv bundle ZIP file.
c. For the working directory, select the folder in which the customized
ISO needs to be created.
d. Click Run.
Figure 6-32 shows an example.
Figure 6-32. ESXi-Customizer Dialog Box
5. Burn a DVD that contains the customized ISO build located in the working
directory specified in Step 4c.
6. Use the new DVD to install the ESXi OS.
Installing the Customized ESXi ISO
1. Load the latest Marvell FCOE boot images into the adapter NVRAM.
2. Configure the FCOE target to allow a valid connection with the remote
machine. Ensure that the target has sufficient free disk space to hold the
new OS installation.
3. Configure the UEFI HII to set the FCOE boot type on the required adapter
port, the correct initiator, and the target parameters for FCOE boot.