Users Guide

6–Boot from SAN Configuration
iSCSI Boot from SAN
109 AH0054602-00 M
7. Go to the Main Configuration Page and select NIC Partitioning
Configuration.
8. On the NIC Partitioning Configuration page, select Partition 1
Configuration.
9. Complete the Partition 1 Configuration page as follows:
a. For Link Speed, select either Auto Neg, 10Gbps, or 1Gbps.
b. Ensure that the link is up.
c. For Boot Protocol, select None.
d. For Virtual LAN Mode, select Disabled.
10. On the NIC Partitioning Configuration page, select Partition 2
Configuration.
11. Complete the Partition 2 Configuration page (see Figure 6-20) as follows:
a. For FCoE Mode, select Disabled.
b. For iSCSI Offload Mode, select Disabled.
Figure 6-20. Integrated NIC: Partition 2 Configuration for VMware