Users Guide

6–Boot from SAN Configuration
iSCSI Boot from SAN
93 AH0054602-00 M
The output from the preceding command shown in Figure 6-16 indicates that
the iSCSI LUN was detected successfully at the preboot level.
Figure 6-16. Detecting the iSCSI LUN Using UEFI Shell (Version 2)
2. On the newly detected iSCSI LUN, select an installation source such as
using a WDS server, mounting the
.ISO with an integrated Dell Remote
Access Controller (iDRAC), or using a CD/DVD.
3. In the Windows Setup window (Figure 6-17), select the drive name on which
to install the driver.
Figure 6-17. Windows Setup: Selecting Installation Destination