Users Guide

6–Boot from SAN Configuration
iSCSI Boot from SAN
77 AH0054602-00 M
5. Select iSCSI Initiator Parameters (Figure 6-8), and then press ENTER.
Figure 6-8. System Setup: Selecting iSCSI Initiator Parameters
6. On the iSCSI Initiator Parameters page (Figure 6-9), select the following
parameters, and then type a value for each:
 IPv4* Address
 Subnet Mask
 IPv4* Default Gateway
 IPv4* Primary DNS
 IPv4* Secondary DNS
 iSCSI Name. Corresponds to the iSCSI initiator name to be used by
the client system.
 CHAP ID
 CHAP Secret