Users Guide
10–iSCSI 配置
Linux 环境中的 iSCSI 卸载
209 AH0054602-05 M
6. 使用在 步骤 5 获取的 IQN 登录到 iSCSI 目标。要启动登录过程，请发出以
下命令 （其中命令中最后一个字符为小写字母 “L”）：
#iscsiadm -m node -p 192.168.25.100 -T
iqn.2003-04.com.sanblaze:virtualun.virtualun.target-0000007 -l
Logging in to [iface: qedi.00:0e:1e:c4:e1:6c,
target:iqn.2003-04.com.sanblaze:virtualun.virtualun.target-05000007, portal:192.168.25.100,3260]
(multiple)
Login to [iface: qedi.00:0e:1e:c4:e1:6c, target:iqn.2003-
04.com.sanblaze:virtualun.virtualun.target-05000007, portal:192.168.25.100,3260] successful.
7. 要验证 iSCSI 会话已创建，请发出以下命令：
# iscsiadm -m session
qedi: [297] 192.168.25.100:3260,1
iqn.2003-04.com.sanblaze:virtualun.virtualun.target-05000007 (non-flash)
8. 要检查 iSCSI 设备，请发出 iscsiadm 命令：
# iscsiadm -m session -P3
...
************************
Attached SCSI devices:
************************
Host Number: 59 State: running
scsi59 Channel 00 Id 0 Lun: 0
Attached scsi disk sdb State: running scsi59 Channel 00 Id 0 Lun: 1
Attached scsi disk sdc State: running scsi59 Channel 00 Id 0 Lun: 2
Attached scsi disk sdd State: running scsi59 Channel 00 Id 0 Lun: 3
Attached scsi disk sde State: running scsi59 Channel 00 Id 0 Lun: 4
Attached scsi disk sdf State: running
有关高级目标配置，请参阅 Open-iSCSI 自述文件，网址为：
https://github.com/open-iscsi/open-iscsi/blob/master/README