Users Guide

7–Linux Driver Software
Driver Messages
56 BC0054508-00 M
[20]: 2a 0 0 2 ffffffc8 14 0 0
[28]: 40 0 0 0 0 0 0 0
Open-iSCSI Daemon Handing Over Session to Driver
bnx2i: conn update - MBL 0x800 FBL 0x800MRDSL_I 0x800 MRDSL_T
0x2000
bnx2fc Driver Messages
The bnx2fc driver messages include the following.
BNX2FC Driver Signon
QLogic FCoE Driver bnx2fc v0.8.7 (Mar 25, 2011)
Driver Completes Handshake with FCoE Offload Enabled C-NIC Device
bnx2fc [04:00.00]: FCOE_INIT passed
Driver Fails Handshake with FCoE Offload Enabled C-NIC Device
bnx2fc: init_failure due to invalid opcode
bnx2fc: init_failure due to context allocation failure
bnx2fc: init_failure due to NIC error
bnx2fc: init_failure due to completion status error
bnx2fc: init_failure due to HSI mismatch
No Valid License to Start FCoE
bnx2fc: FCoE function not enabled <ethX>
bnx2fC: FCoE not supported on <ethX>
Session Failures Due to Exceeding Maximum Allowed FCoE Offload Connection
Limit or Memory Limits
bnx2fc: Failed to allocate conn id for port_id <remote port id>
bnx2fc: exceeded max sessions..logoff this tgt
bnx2fc: Failed to allocate resources
Session Offload Failures
bnx2fc: bnx2fc_offload_session - Offload error
<rport> not FCP type. not offloading
<rport> not FCP_TARGET. not offloading