Users Guide

7–Linux Driver Software
Driver Messages
54 BC0054508-00 M
Exceeds Maximum Allowed iSCSI Connection Offload Limit
bnx2i: alloc_ep: unable to allocate iscsi cid
bnx2i: unable to allocate iSCSI context resources
Network Route to Target Node and Transport Name Binding Are Two Different
Devices
bnx2i: conn bind, ep=0x... ($ROUTE_HBA) does not belong to hba
$USER_CHOSEN_HBA
Where ROUTE_HBA is the net device on which the connection was offloaded
based on route information, and USER_CHOSEN_HBA is the Host Bus Adapter to
which the target node is bound (using iSCSI transport name)
Target Cannot Be Reached on Any of the C-NIC Devices
bnx2i: check route, cannot connect using cnic
Network Route Is Assigned to Network Interface, Which Is Down
bnx2i: check route, hba not found
SCSI-ML Initiated Host Reset (Session Recovery)
bnx2i: attempting to reset host, #3
C-NIC Detects iSCSI Protocol Violation - Fatal Errors
bnx2i: iscsi_error - wrong StatSN rcvd
bnx2i: iscsi_error - hdr digest err
bnx2i: iscsi_error - data digest err
bnx2i: iscsi_error - wrong opcode rcvd
bnx2i: iscsi_error - AHS len > 0 rcvd
bnx2i: iscsi_error - invalid ITT rcvd
bnx2i: iscsi_error - wrong StatSN rcvd
bnx2i: iscsi_error - wrong DataSN rcvd
bnx2i: iscsi_error - pend R2T violation
bnx2i: iscsi_error - ERL0, UO
bnx2i: iscsi_error - ERL0, U1
bnx2i: iscsi_error - ERL0, U2
bnx2i: iscsi_error - ERL0, U3
bnx2i: iscsi_error - ERL0, U4
bnx2i: iscsi_error - ERL0, U5
bnx2i: iscsi_error - ERL0, U
bnx2i: iscsi_error - invalid resi len
bnx2i: iscsi_error - MRDSL violation