Users Guide

4–Installing the Hardware
Safety Precautions
19 BC0054508-00 M
Safety Precautions
Preinstallation Checklist
1. Verify that your system meets the hardware and software requirements
listed under “System Requirements” on page 17.
2. Verify that your system is using the latest BIOS.
3. If your system is active, shut it down.
4. When system shutdown is complete, turn off the power and unplug the
power cord.
5. Remove the adapter from its shipping package and place it on an antistatic
surface.
6. Check the adapter for visible signs of damage, especially on the edge
connector. Never attempt to install a damaged adapter.
! WARNING
The adapter is being installed in a system that operates with voltages that
can be lethal. Before you open the case of your system, observe the
following precautions to protect yourself and to prevent damage to the
system components:
 Remove any metallic objects or jewelry from your hands and wrists.
 Make sure to use only insulated or nonconducting tools.
 Before you touch internal components, verify that the system is powered
OFF and is unplugged.
 Install or remove adapters in a static-free environment. The use of a
properly grounded wrist strap or other personal antistatic devices and an
antistatic mat is strongly recommended.
NOTE
If you acquired the adapter software on a disk or from the Dell support
Web Site (http://support.dell.com
), verify the path to the adapter driver
files.