Users Guide

3–Virtual LANs in Windows
Adding VLANs to Teams
16 BC0054508-00 M
Adding VLANs to Teams
Each Marvell QLASP adapter team supports up to 64 VLANs (63 tagged and
1 untagged). Note that only Marvell adapters and Alteon
®
AceNIC adapters can
be part of a team with VLANs. With multiple VLANs on an adapter, a server with a
single adapter can have a logical presence on multiple IP subnets. With multiple
VLANs in a team, a server can have a logical presence on multiple IP subnets and
benefit from load balancing and failover.
NOTE
You can configure adapters that are members of a failover team to also
support VLANs. Because VLANs are not supported for an Intel LOM, if an
Intel LOM is a member of a failover team, you cannot configure VLANs for
that team.