Users Guide

18–Troubleshooting
Microsoft Virtualization with Hyper-V
295 BC0054508-00 M
Teamed Network Adapters
Table 18-2 identifies Hyper-V supported features that are configurable for
BCM57xx and BCM57xxx teamed network adapters. This table is not an
all-inclusive list of Hyper-V features.
The Marvell QLASP NIC teaming driver is not supported in Windows Server 2016
or later.
Table 18-2. Configurable Teamed Network Adapter Hyper-V Features
Feature
Supported in Windows
Server Version 2012
Comments and Limitations
Smart Load Balancing and
Failover (SLB) team type
Yes Multimember SLB team allowed with
latest QLASP6 version.
NOTE: VM MAC is not presented to
external switches.
Link aggregation (IEEE
802.3ad LACP) team type
Yes —
Generic trunking (FEC/GEC)
802.3ad draft static team type
Yes —
Failover Yes —
LiveLink Yes —
Large send offload (LSO) Yes * Conforms to miniport limitations out-
lines in Table 18-1.
Checksum offload (CO) Yes * Conforms to miniport limitations out-
lines in Table 18-1.
Hyper-V VLAN over an
adapter
Yes —
Hyper-V VLAN over a teamed
adapter
Yes —
Hyper-V VLAN over a VLAN Limited* Only an untagged VLAN.
Hyper-V virtual switch over an
adapter
Yes —
Hyper-V virtual switch over a
teamed adapter
Yes —
Hyper-V virtual switch over a
VLAN
Yes —
iSCSI boot No* * Remote boot to SAN is supported.