Users Guide

13–Fibre Channel Over Ethernet
FCoE Boot from SAN
241 BC0054508-00 M
7. On the Confirm Install window (Figure 13-30), press the F11 key to confirm
the installation and repartition.
Figure 13-30. ESXi Confirm Install
8. After successful installation (Figure 13-31), press ENTER to reboot.
Figure 13-31. ESXi Installation Complete
9. On 57800 and 57810 boards, the management network is not vmnic0. After
booting, open the GUI console and view the Configure Management
Network, and then the Network Adapters window (Figure 13-32) to select
the NIC to be used as the management network device.
Figure 13-32. ESXi Management Network Selection